DANNMAR D4-12A 12,000-LBS. CAPACITY ALIGNMENT FOUR-POST LIFT / INCLUDES SLIP PLATES AND TURNPLATES
$1,520.58
Description
Dannmar’s 12,000 lb. capacity alignment lift is two lifts in one. That’s because it works as an alignment system and a car lift. Dannmar’s utilized industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance.
This is the sturdy alignment lift for most shops, especially if you service large, low ground-clearance vehicles. Dannmar’s alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with free-floating and no resistance.
Dannmar’s D4-12A four-post alignment lift utilizes multi-caster slip plates in the rear and turn plates in the front that allow for very precise alignments. These turn plates also provide more clearance for equipment installations. The lift can otherwise be used for most repairs and vehicle or light to medium weight truck storage. With a lift like the Dannmar D4-12A, shops can free up extra floor space or increase parking capacity.
The Dannmar D4-12A alignment lift comes standard with robust 10.5” diameter dual-hub cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles. A heavy-duty 1/2” diameter aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions from weather, chemicals, and hydraulic oil. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service. Other features include electric/hydraulic power, push button pneumatic lock release, adjustable height locking positions, an optional rolling bridge jack, and more.
Features
- 12,000 pound lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Heavy-duty turn plates and integrated rear slip-plates
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
- Multi-position safety locks in each column with push-button safety release
- Runways adjust for different tread widths and feature non-skid surface
- Optional 6,000-lb. capacity bridge jacks available
Specs
| SKU# | 5175318 |
|---|---|
| LIFTING CAPACITY | 12,000 lbs. (5,443 kg) |
| A – MIN. RUNWAY HEIGHT | 9.5″ (243 mm) |
| B – MAX. RISE | 68.75″ (1,746 mm) |
| C – MAX. LIFTING HEIGHT | 79.5″ (2,019 mm) |
| D – RAMP CLEARANCE* (MAX. RISE) | 49″ (1,245 mm) |
| E – HEIGHT OF COLUMNS | 92″ (2,337 mm) |
| F – DRIVE-THRU CLEARANCE | 98” (2,482 mm) |
| G – OVERALL WIDTH | 127.5″ (3,239 mm) |
| H – WIDTH BETWEEN COLUMNS | 115.75″ (2,940 mm) |
| I – OVERALL LENGTH | 233.5″ (2,940 mm) |
| J – OUTSIDE COLUMNS | 115.75″ (2,940 mm) |
| K – WIDTH BETWEEN RUNWAYS | 34.5″ (876 mm) or 41.5″ (1,054 mm) |
| L – RUNWAY CENTERLINE | 54.5″ (1,384 mm) or 61.5″ (1,562 mm) |
| M – OUTSIDE EDGE OF RUNWAYS | 74.5″ (1,892 mm) or 81.5″ (2,070 mm) |
| N – RUNWAY WIDTH | 20″ (508 mm) |
| O – LENGTH OF RUNWAYS | 194.75″ (4,947 mm) |
| MIN. 4-WHEEL ALIGNMENT | 106” (2,692 mm) |
| MAX. 4-WHEEL ALIGNMENT | 158.5” (4,026 mm) |
| MAX. 2-WHEEL ALIGNMENT | 163.5” (4,153 mm) |
| MIN. WHEELBASE @ RATED CAPACITY | 140” (3,556 mm) |
| MIN. WHEELBASE @ 75% CAPACITY | 120” (3,048 mm) |
| MIN. WHEELBASE @ 50% CAPACITY | 100” (2,540 mm) |
| MIN. WHEELBASE @ 25% CAPACITY | 80” (2,032 mm) |
| LOCKING POSITIONS | 15 (spaced every 4” / 102 mm) |
| TIME TO FULL RISE | 60 seconds |
| MOTOR | 220 VAC / 60 Hz / 1 Ph |
Reviews (0)
Related Products
The Mayflower Blacksmith Four Post Lift Pro 8000 is a heavy-duty car lift designed for storage and service. It has a capacity of 8000 lbs and features a four post design that provides stability and strength for lifting vehicles. The lift can be used for storing vehicles and for performing maintenance and repair work on cars and trucks. The Pro 8000 has a clear floor design for easy access to the undercarriage and wheels, and its height can be adjusted to accommodate a wide range of vehicles.
The Mayflower Blacksmith Pro8000XLH is a heavy-duty, four-post lift designed for vehicle storage and service. It has a capacity of 8,000 lbs and extra length and height.
Reviews
There are no reviews yet.